SW 300: Difference between revisions

From Grail Watch Wiki
Jump to navigation Jump to search
Created page with "The '''Sellita SW 300''' is an automatic movement from Sellita based on the ETA 2892-2. ==History== Introduced as the SW 300, Sellita soon updated the lower brid..."
 
m 1 revision imported
 
(3 intermediate revisions by 2 users not shown)
Line 3: Line 3:
==History==
==History==


Introduced as the SW 300, Sellita soon updated the lower bridge for durability as the SW 300-1.
Introduced as the SW 300, Sellita soon updated the lower bridge for durability as the SW 300-1. Although many sources claim introduction as early as 2003, there is no evidence that the SW300 name existed prior to 2008. Sellita's own website only shows SW300 as of December, 2008. An updated version with improved gear profile appeared in 2008 and a new pallet bridge has been used since 2013.
 
Many watch manufacturers switched from ETA's 2892A2 to Sellita's SW300-1, often without advertising the change in suppliers. Today, most non-Swatch Group watch makers use this movement instead of the ETA.


==Variants==
==Variants==


All versions of Cal. SW 300 measure 11.5 ligne, feature automatic winding and a date wheel.
All versions of Cal. SW 300 measure 11.5 ligne, feature automatic winding and a date wheel. The movement is 25.6 mm in diameter, 3.6 mm thick, 25 jewels, and is a direct replacement for the [[ETA 2892A2]].


* SW 300-1 - Automatic, date
* SW 300-1 - Automatic, date, 3.6 mm thick, 25 jewels
** SW 330-1 - Automatic, date, 24 hour hand
** SW 330-1 - Automatic, date, 24 hour hand, 4.1 mm thick, 25 jewels
** SW 330-1 - Automatic, date, small seconds at 6:00
** SW 360-1 - Automatic, date, small seconds at 6:00, 3.6 mm thick, 31 jewels


==Ebauche Variants==
==Ebauche Variants==
* [[Bell & Ross]] BR-Cal.302
* [[TAG Heuer]] Calibre 7, replacing the original ETA movement known by that name
* [[TAG Heuer]] Calibre 7, replacing the original ETA movement known by that name
* [[IWC]] 35111 (SW 300-1)
* [[IWC]] 35111 (SW 300-1)
* [[IWC]] 35710, 35720, 35750 (SW 330-1)
* [[IWC]] 35710, 35720, 35750 (SW 330-1)
* [[IWC]] 35800 - Adds [[moon phase indicator]] module
* [[IWC]] 35800 - Adds [[moon phase indicator]] module
==External Links==
* [https://reference.grail-watch.com/family/sellita-sw300/ Sellita SW300 Family]


[[Category:Sellita calibres]]
[[Category:Sellita calibres]]
[[Category:Automatic movements]]
[[Category:Automatic movements]]
[[Category:ETA 2892]]
[[Category:ETA 2892]]

Latest revision as of 15:17, 23 July 2021

The Sellita SW 300 is an automatic movement from Sellita based on the ETA 2892-2.

History

Introduced as the SW 300, Sellita soon updated the lower bridge for durability as the SW 300-1. Although many sources claim introduction as early as 2003, there is no evidence that the SW300 name existed prior to 2008. Sellita's own website only shows SW300 as of December, 2008. An updated version with improved gear profile appeared in 2008 and a new pallet bridge has been used since 2013.

Many watch manufacturers switched from ETA's 2892A2 to Sellita's SW300-1, often without advertising the change in suppliers. Today, most non-Swatch Group watch makers use this movement instead of the ETA.

Variants

All versions of Cal. SW 300 measure 11.5 ligne, feature automatic winding and a date wheel. The movement is 25.6 mm in diameter, 3.6 mm thick, 25 jewels, and is a direct replacement for the ETA 2892A2.

  • SW 300-1 - Automatic, date, 3.6 mm thick, 25 jewels
    • SW 330-1 - Automatic, date, 24 hour hand, 4.1 mm thick, 25 jewels
    • SW 360-1 - Automatic, date, small seconds at 6:00, 3.6 mm thick, 31 jewels

Ebauche Variants

External Links