Habring Chronograph COS

Chronograph COS is a wristwatch by Habring.

This chronograph of the Austrian company Habring completely manages without pushers. To operate the addition stop function the winding crown is used, which is rotated slightly against easily tangible resistors. The advantage of this design lies in the risk reduction of flooding, also pushers can no longer be damaged or activated involuntarily.

The watch is delivered in a travel case made of leather, closed with a spare watchband, and a three-piece wooden case made of Douglas fir, with spare parts receptacle, which contains a winding crown, a complete set of seals and one set of hands.

Each watch is numbered and only built after order. Only twelve watches are manufactured per series.

Movement: Manual winding movement Calibre A08, gear basing on ETA 7750 or ETA 7760 Screw balance with Triovis fine regulation 17 jewels Power reserve 48 h Case: Case in titanium Ø 42.0 mm Fixed bezel Sapphire crystal with anti-glare treatment on both sides Screw-in crown, screw-in back in sapphire crystal Shockproof according to DIN and NIHS Waterproof to 50 m Dial: Ruthenium coated dial with rhodinated indexes, with Superluminova coating Hours and minutes hand rhodinated, with Superluminova coating, small second at 9 o'clock Functions: Addition stop function with central chrono second indication and 30 minutes counter at 3 o'clock Bracelet: Grey micro fiber watchband with rubber lining