IWC 5000

From Grail Watch Wiki
Jump to navigation Jump to search

Cal. 5000 was the first in-house movement for IWC in modern times and started the Cal. 50000 family in 2000.


On its release in 2000 in the limited-edition IWC Portugieser 2000, IWC's Cal. 5000 was lauded by the brand's followers. It marked the restart of completely-in-house watch movement development for the company and resurrected the legacy IWC Portugieser watch design. The movement was seen as a landmark in other ways, with 8-day power reserve, automatic winding, and a massive 16.75 ligne (38.2 mm) diameter.

Most importantly, Cal. 5000 brought back IWC's legendary Pellaton winding system. For its second life, the Pellaton system gained two pawls instead of one, with both pulling the massive 8-day mainspring barrel whenever the rotor turned in either direction. The rotor too was a massive one, both to fit the movement diameter and to wind that over-sized spring. Indeed, the rotor includes its own shock absorber to resist breakage in daily use.

Another concession to the massive mainspring, with its varying isochronism, is the use of two different regulating mechanisms. The traditional IWC balance wheel features an adjustment screw on each of its two arms, and a conventional screwed index is also provided on the bridge. This allows the watchmaker to adjust the watch for timekeeping over a short or long duration. The balance wheel is quite large as well, ticking at a slow 18,000 A/h, and is said to be the same as found in the predecessor Portugieser movement, Cal. 89. A final nod to power reserve is the use of a mechanism to stop the balance after 7 days, retaining the final day of reserve to restart the watch when it is picked up.

The fact that Cal. 5000 uses a single mainspring and barrel has impacted the reputation of this movement. As admitted by Richard Habring and other IWC staff, the watch was meant for "weekend wear" and is thus tuned to keep time accurately over a week. But the single mainspring does not deliver power consistently, so the movement runs quite fast for the first two days, more predictably for the next few, and slows down at the end. This causes issues for timing, maintenance, and daily wear. The next-generation Cal. 52000 family used double barrel construction to deliver more consistent torque and timing throughout the week.

Just after launch, the movement was revised for reliability under the leadership of Kilian Eisenegger, who had previously developed the Co-Axial movement for ETA and Omega. Sales were stopped and the winding geometry was changed to make it more resistant to shocks.

Cal. 5000 was updated in 2004 to become Cal. 50010. Like its predecessor it features small seconds at 9:00 and a circular power reserve indicator dial at 3:00.

In 2005, the movement was upgraded to operate at 21,600 A/h as Cal. 51010. In 2007, Cal. 51011 was introduced.



Automatic movement
Bi-directional winding (Pellaton winding system) on spring-mounted rotor, cam disc, ruby wheels and 2 latches on ratchet wheel, gear reduction: 175:1
Escapement: stone lever
Yoke winding system
Breguet hairspring
Incabloc shock protection
Two-armed screw balance with 16 weight srews and 2 adjustment eccentrics on the escapement arms
Hairspring Nivarox 1 with Breguet bending
IWC precision adjustment: hairspring stud and regulator adjustable with eccentric
Bridges and plate nickel coated, engravings gilded, decoration of type "Côtes circulaires"
Weight segment IWC-style (without gold medaillon) with gilded Probus-Scafusia engraving, plate wheel, crown wheels, ratchet, barrel lid and differential gear with solar grinding


Hours, minutes, small seconds at 9 h
Hacking seconds
Quickset date feature, jumping
Power reserve indicator


16,75 lignes
Ø 38.2 mm, H 7,44 mm
44 jewels
18,000 A/h
5000: 286 components
Power reserve 204 h, limited to 168 h

Production period:

Production: 2000-Present
Successor: IWC 52010