Martel Watch: Difference between revisions
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
Founded in [[1911]] in [[Le Locle]] by Georges Pellaton-Steudler, Martel Watch Co. was a specialty maker of [[repetition]] and [[chronograph]] movements. This category was rapidly rising, especially in Le Locle, and Martel soon became a favored producer. The company is first listed in [[Indicateur Davoine]] as '''Georges Pellaton-Steudler''', maker of "Répétitions et Chronographes" at 5 Rue du Chemin-Blanc in [[Le Locle]]. On June 23, [[1914]], the '''Martel Watch Co.''' was established in [[Ponts-de-Martel]] by Pellaton-Steudler, though the Le Locle office remained active as well through the 1920s. Georges was the son of famed [[tourbillon]] creator [[Albert Pellaton-Favre]] and brother of Le Locle watchmaking school director [[Jämes-Cesar Pellaton]]. | Founded in [[1911]] in [[Le Locle]] by Georges Pellaton-Steudler, Martel Watch Co. was a specialty maker of [[repetition]] and [[chronograph]] movements. This category was rapidly rising, especially in Le Locle, and Martel soon became a favored producer. The company is first listed in [[Indicateur Davoine]] as '''Georges Pellaton-Steudler''', maker of "Répétitions et Chronographes" at 5 Rue du Chemin-Blanc in [[Le Locle]]. On June 23, [[1914]], the '''Martel Watch Co.''' was established in [[Ponts-de-Martel]] by Pellaton-Steudler, though the Le Locle office remained active as well through the 1920s. Georges was the son of famed [[tourbillon]] creator [[Albert Pellaton-Favre]] and brother of Le Locle watchmaking school director [[Jämes-Cesar Pellaton]]. | ||
Martel's initial production facilities were modest and distributed throughout Ponts-de-Martel. The famous headquarters building was then only one floor above a garage, and this is where ebauches were produced. These were shipped to a different factory at Rue de l'Industrie for finishing. In [[1937]] the garages were replaced by new workshops, and the building was expanded upward in [[1940]] in a complete renovation. In [[1952]] an annex was added with new modern equipment. | Martel's initial production facilities were modest and distributed throughout Ponts-de-Martel. The famous headquarters building was then only one floor above a garage, and this is where ebauches were produced. These were shipped to a different factory above [[Mathey-Tissot]] at Rue de l'Industrie for finishing. In [[1937]] the garages were replaced by new workshops, and the building was expanded upward in [[1940]] in a complete renovation. In [[1952]] an annex was added with new modern equipment. | ||
As early as [[1917]], Martel began specializing in [[chronograph]] movements, working with [[Universal]] for a movement that the company boasted was the world's first wrist chronograph. These were [[mono-pusher]] movements with the chronograph pusher integrated into the crown as on pocket chronographs. In [[1932]], Universal launched what they claimed was the world’s first two-pusher wrist watch chronograph. With its dual-subdial design and pushers at 2:00 and 4:00, these remain the template for all future chronograph watches. They were powered by the [[Universal 281]] movement, produced in [[Les Ponts-de-Martel]] possibly by Martel. A year or two later, in [[1933]] or [[1934]], Universal launched a three-subdial chronograph. Zenith and Universal named these chronograph designs [[compur]] and [[compax]], a name which has stuck ever since. | As early as [[1917]], Martel began specializing in [[chronograph]] movements, working with [[Universal]] for a movement that the company boasted was the world's first wrist chronograph. These were [[mono-pusher]] movements with the chronograph pusher integrated into the crown as on pocket chronographs. In [[1932]], Universal launched what they claimed was the world’s first two-pusher wrist watch chronograph. With its dual-subdial design and pushers at 2:00 and 4:00, these remain the template for all future chronograph watches. They were powered by the [[Universal 281]] movement, produced in [[Les Ponts-de-Martel]] possibly by Martel. A year or two later, in [[1933]] or [[1934]], Universal launched a three-subdial chronograph. Zenith and Universal named these chronograph designs [[compur]] and [[compax]], a name which has stuck ever since. |
Revision as of 01:49, 24 October 2022
Martel Watch Company was a Swiss watch movement company in the 20th century.
Founded in 1911 in Le Locle by Georges Pellaton-Steudler, Martel Watch Co. was a specialty maker of repetition and chronograph movements. This category was rapidly rising, especially in Le Locle, and Martel soon became a favored producer. The company is first listed in Indicateur Davoine as Georges Pellaton-Steudler, maker of "Répétitions et Chronographes" at 5 Rue du Chemin-Blanc in Le Locle. On June 23, 1914, the Martel Watch Co. was established in Ponts-de-Martel by Pellaton-Steudler, though the Le Locle office remained active as well through the 1920s. Georges was the son of famed tourbillon creator Albert Pellaton-Favre and brother of Le Locle watchmaking school director Jämes-Cesar Pellaton.
Martel's initial production facilities were modest and distributed throughout Ponts-de-Martel. The famous headquarters building was then only one floor above a garage, and this is where ebauches were produced. These were shipped to a different factory above Mathey-Tissot at Rue de l'Industrie for finishing. In 1937 the garages were replaced by new workshops, and the building was expanded upward in 1940 in a complete renovation. In 1952 an annex was added with new modern equipment.
As early as 1917, Martel began specializing in chronograph movements, working with Universal for a movement that the company boasted was the world's first wrist chronograph. These were mono-pusher movements with the chronograph pusher integrated into the crown as on pocket chronographs. In 1932, Universal launched what they claimed was the world’s first two-pusher wrist watch chronograph. With its dual-subdial design and pushers at 2:00 and 4:00, these remain the template for all future chronograph watches. They were powered by the Universal 281 movement, produced in Les Ponts-de-Martel possibly by Martel. A year or two later, in 1933 or 1934, Universal launched a three-subdial chronograph. Zenith and Universal named these chronograph designs compur and compax, a name which has stuck ever since.
The next great advancement for Martel, with partners Universal and Zenith, was the introduction of a wrist watch chronograph with a calendar complication. Launched around 1942, the new four-subdial design added a dial at 12:00 to show the date, two adjacent windows for day and month, and optional moon phase indicators were also added. By this time, Universal had built their own facility in Les Ponts-de-Martel, and history is unclear as to which company, Universal or Martel, is responsible for these movements.
In the 1950s, Martel began marketing watches with their own brand name, both time-only and chronograph models. One notable model in the mid 1950s was the Martel Victorious, an automatic movement with date in a waterproof case.
By this time, Zenith had begun using Excelsior Park chronograph movements from Saint-Imier and Le Sentier as well, but they returned to purchase Martel outright at the end of the decade.
Ponts-de-Martel is located near Le Locle, home of Zenith and Universal, and the company long shared some production and management with those companies. Eventually, in 1959, Zenith purchased Martel and absorbed its expertise, movement designs, and production facilities. It became part of Movado-Zenith-Mondia when that group was founded in 1969 and Zenith Time after the 1972 purchase of the group by Zenith of Chicago.
The Martel factory slowly dwindled in staff until January 1976 when the decision was made to close the factory. By this time it employed just 36 people (down from 100 at its peak) and all were offered new positions in Le Locle. The remaining equipment was liquidated at auction in August. A maker of meat pies was to take over the factory in 1977 but this move was delayed by a fire in January of that year. Although the building was damaged, it was able to open later in the year.
Georges Pellaton-Rickli lead Martel from 1915 to 1940 when he retired. He died in April 1950. The factory was then lead by his three sons, Georges, René, and Raoul. Raoul Pellaton (1902-1977) died in April 1977. René died in 1982, and his estate bequeathed the annex of the factory building to the village in 1991.
Martel Calibres
- Cal. 1016 - 10.5 ligne chronograph (for Universal Genève)
- Cal. 1226/1326/1426 - 12.25/13/14.3 ligne chronograph (for Universal Genève)
- Cal. 1416/1516 - 14.3/15 ligne chronograph (for Universal Genève)
- Cal. 1916 - 19 ligne chronograph
- Cal. 749 - 14 ligne chronograph (aka Universal 285 and Zenith 146)