ETA: Difference between revisions
No edit summary |
|||
Line 32: | Line 32: | ||
In July [[2002]], ETA management announced that it would reduce sales of unfinished movements outside the Swatch Group as of [[2003]] and cease all sales in [[2006]]. The company would only sell finished movements, forcing other companies to pay far higher prices and eliminating finishers of ETA ebauches. The explosion of new and re-born Swiss watch companies in the 1990s and 2000s is built primarily on ETA movement production and expertise, and this impacts sales of Swatch Group companies. Additionally, it is unhealthy for the industry to have a single source for critical components. This move followed widespread criticism that the Swatch Group monopolized production of balance springs through [[Nivarox]]. | In July [[2002]], ETA management announced that it would reduce sales of unfinished movements outside the Swatch Group as of [[2003]] and cease all sales in [[2006]]. The company would only sell finished movements, forcing other companies to pay far higher prices and eliminating finishers of ETA ebauches. The explosion of new and re-born Swiss watch companies in the 1990s and 2000s is built primarily on ETA movement production and expertise, and this impacts sales of Swatch Group companies. Additionally, it is unhealthy for the industry to have a single source for critical components. This move followed widespread criticism that the Swatch Group monopolized production of balance springs through [[Nivarox]]. | ||
At this time, Swatch Group produced 80% of all Swiss watch movements (though Hayek claimed it was "97%", ignoring Rolex), 90% of the market for [[assortiment]]s and related components, and a large share of the production of watch hands ([[Universo]]), sapphire crystals ([[Comadur]]), and micro-mechanical components ([[Valdar]]). Only [[Rolex]] was able to produce watch movements independently, and companies like [[Sellita]], [[ | At this time, Swatch Group produced 80% of all Swiss watch movements (though Hayek claimed it was "97%", ignoring Rolex), 90% of the market for [[assortiment]]s and related components, and a large share of the production of watch hands ([[Universo]]), sapphire crystals ([[Comadur]]), and micro-mechanical components ([[Valdar]]). Only [[Rolex]] was able to produce watch movements independently, and companies like [[Sellita]], [[Soprod]], and [[Jaquet SA]] were entirely reliant on ETA ebauches. | ||
[[COMCO]] took up the case on November 4, with Swatch Group announcing a compromise four days later, promising continue volume shipments of unfinished ebauches until 2008 with a two year phase-out following. Yet in November of 2002, just after this announcement, ETA increased the price of ETA ebauches by 25%. This move was unsuccessfully contested to COMCO by [[Sellita]]. | [[COMCO]] took up the case on November 4, with Swatch Group announcing a compromise four days later, promising continue volume shipments of unfinished ebauches until 2008 with a two year phase-out following. Yet in November of 2002, just after this announcement, ETA increased the price of ETA ebauches by 25%. This move was unsuccessfully contested to COMCO by [[Sellita]]. |
Revision as of 14:53, 13 April 2024
Template:Hersteller-MenueWV Template:Image ETA SA Manufacture Horlogère Suisse (commonly called ETA) is the best-known Swiss ebauche movement manufacturer. Part of the Swatch Group, ETA traces its lineage to 1793, though the name dates only to 1932.
History
ETA emerged as a holding company for the majority of Swiss watch movement production in the 20th century. As such, it can trace its roots to some of the earliest factories in Switzerland. In 1793, Isaac and David Benguerel, Julien and Francois Humbert-Droz founded the first factory for ebauche movements, Fabrique d'Horlogerie de Fontainemelon (FHF), in Fontainemelon, Canton of Neuchâtel. FHF began industrial production of watch movements in 1816, and this date is another appropriate beginning point for ETA, since FHF was absorbed into the company in 1982.
The true beginning of ETA is 1856, when Urs Schild and Dr. Joseph Girard founded an ebauche factory in Grenchen. This company would become Eterna, which was split 76 years later to become ETA. Also in Grenchen, in 1896, Adolf Schild founds the ebauche company A. Schild (AS), where the first cylinder and pin lever movements are produced.
On December 27 1926, A. Schild AG (AS or ASSA) and Adolphe Michel SA (AMSA) of Grenchen and Fabrique d' Horlogerie de Fontainemelon (FHF) of Fontainemelon agree to join together to form Ebauches SA. This holding company, registered on December 30 and going into effect on the first day of 1927, is intended to bring order to the chaotic watch movement manufacturing industry, and it expands rapidly. Soon, Ebauches SA is the largest producer of watch movement blanks in Switzerland.
ETA, ASUAG, and Ebauches SA
In 1931, Ebauches SA joins with many other Swiss companies to create ASUAG, a larger holding company. Eterna joins this conglomerate in 1932, but is split in two to match the overall organizational structure of ASUAG:
- Eterna SA manufactures whole watches
- ETA SA Fabriques d'Ebauches manufactures watch ebauche movements
This is the true birth of ETA, with the name and purpose firmly established. Over the following years, many other companies are absorbed into ASUAG/Ebauches SA and the cartel dictates which are allowed to produce each type of movement. Thanks to their research into automatic movements with Eterna, ETA is one of the few companies within this group to be allowed to produce automatic movements in the 1950's. Along with A. Schild and Felsa, ETA is considered a high-end movement maker and supplies many of the companies that exist even today.
The quartz crisis causes another contraction in the industry in the 1970's and, in 1979, A. Schild is merged into ETA to become the largest ebauche movement manufacturer in the world. Three years later, FHF (owner of Landeron) is brought into ETA along with other ebauche makers. Finally, in 1983, Ebauches SA is dissolved and most of the remaining companies, including Unitas, Peseux, and Valjoux (successor of Venus), join ETA.
ETA as part of the Swatch Group
ASUAG merged with rival SSIH in 1983, and the result was reorganized as SMH in 1985. This was the predecessor to the modern Swatch Group, the world's largest watch company.
ETA remained as the primary provider of individual movement parts, tools, kits and complete watch movements within and outside the Swatch Group. The kits are still processed, refined and sometimes provided with additional features by some manufacturers. ETA is also the primary source for balance springs, assortments, and other critical components to the Swiss watch industry.
ETA launched a new sub-brand, Valgranges in 2005. The name, derived from Valjoux and "Granges" or Grenchen, reflects the nature of the products, a range of larger movements derived from the Valjoux 7750.
Restricting the Sale of Watch Movements
In July 2002, ETA management announced that it would reduce sales of unfinished movements outside the Swatch Group as of 2003 and cease all sales in 2006. The company would only sell finished movements, forcing other companies to pay far higher prices and eliminating finishers of ETA ebauches. The explosion of new and re-born Swiss watch companies in the 1990s and 2000s is built primarily on ETA movement production and expertise, and this impacts sales of Swatch Group companies. Additionally, it is unhealthy for the industry to have a single source for critical components. This move followed widespread criticism that the Swatch Group monopolized production of balance springs through Nivarox.
At this time, Swatch Group produced 80% of all Swiss watch movements (though Hayek claimed it was "97%", ignoring Rolex), 90% of the market for assortiments and related components, and a large share of the production of watch hands (Universo), sapphire crystals (Comadur), and micro-mechanical components (Valdar). Only Rolex was able to produce watch movements independently, and companies like Sellita, Soprod, and Jaquet SA were entirely reliant on ETA ebauches.
COMCO took up the case on November 4, with Swatch Group announcing a compromise four days later, promising continue volume shipments of unfinished ebauches until 2008 with a two year phase-out following. Yet in November of 2002, just after this announcement, ETA increased the price of ETA ebauches by 25%. This move was unsuccessfully contested to COMCO by Sellita.
Over the years, Swatch Group and COMCO have worked to restrict sales of movements and ebauches and force outside companies to look for other suppliers.
As of 2016, this process is ongoing, with companies like Sellita and Soprod increasing production to supply the industry with complete movements and luxury makers increasingly producing their own parts and movements.
Current Products
ETA is well-known as a producer of many watch movements, but the following are particularly popular today:
- 2800 family (based on ETA/Eterna technology)
- ETA 2824-2 - 25 jewel automatic movement
- ETA 2836-2 - 25 jewel automatic movement
- 2900 family
- ETA 2892-A2 - 21 jewel automatic movement
- Valjoux family (including Venus technology)
- ETA 7750 (formerly Valjoux 7750 - 25 jewel automatic chronograph movement
- Unitas family
- Peseux family
For more information, please see ETA calibres
See Also
- List of ebauche factories
- Eterna, predecessor of ETA
- Ebauches SA, which ETA inherited
- ASUAG, predecessor of Swatch Group
- Swatch Group, owner of ETA today
Literature
- Das große Uhren-ABC, Band 1, Firmen, Geschichte, Uhrwerke, Uhren-Lexikon, Technik; Authors: Gerhard Claußen , Karl-Hermann Ströde; ISBN 3980367509
- Das große Uhren-ABC, Band 2, Firmen, Uhrwerke, Technik; Authors: Gerhard Seelen, Karl-Hermann Ströde, Edda Gräfje; ISBN 3980367517
Weblinks
- ETA SA, official website
- ETA Winding
- A Brief History of ETA: THE Swiss Watch Movement Maker